Strip Cut Hexagons from the book Easy Hexagon Designs by Kaye Wood

Step 1: Measure the height of the hexagon. This equals the width of the strip needed. Cut a strip of fabric this width. Measure the Hexagon
Place the Starmaker 6 on the Hexagon Step 2: Fold the strip in half lengthwise and press lightly. Place the Starmaker 6 with the top point at the raw edges of the strip.

Place a piece of Static Sticker on the Starmaker 6 below the strip and with the top of the Static Sticker lined up with the folded edge.

Tips on using the Starmaker 6.
The strip can be folded right sides in or out. If the folded edge lines up with a parallel line on the Starmaker 6, use that line.
Step 3: Move the Starmaker 6 so that the top of the Static Sticker is now at the top of the strip and even with the raw edges.

Place a second piece of Static Sticker on the Starmaker 6 below the strip and with the top of the tape lined up with the folded edge.

Cut along both sides of the Starmaker 6. Unfold the piece and you have a perfect hexagon.

 Cutting the Hexagons
Step 4: Cut each hexagon the same way
The two triangles between each hexagon can be used for another project.
HOME
Back To Catalog
Questions?
Click Here to Join Kaye's Newsletter!

Kaye Wood Inc. Copyright 2007