Wolf Wallhanging using the View and Do Shapes by Kaye Wood

	Size is 13" x 40" Need: l Fabric Front - 15" x 44" l Fabric back - 15" x 44" l Black frame: 4-1/2" squares l Fabric motif: 4 8" shapes l Black Fusible Bias Tape - 1pkg l Steam-A-Seam 2 - 2 pgs l View & Do Shapes - see above l Trim (piping or rickrack) 5 yds

Black Frame:

1. Cut 1 8" black shape and 1 8" Steam-ASeam 2 from each of the View and Do Shapes.Fuse the Steam-A-Seam 2 to the back of the black shape.

2. Fuse the black shapes on the background fabric.The square can be square or on point.

3. Cut 6" View and Do Shapes from the motif fabric and the Steam-A-Seam 2.Fuse the Steam-A-Seam 2 to the back of each of the motif shapes.

4. Center the motif on the black shape:Place the outside ring of the View and Do Shape on top of the 8" black shape. Place the 6" motif shape inside the opening in the shape. Remove the View and Do Shape and fuse the motif shape to the black shape

5. Fuse fusible bias tape to cover the edges of both the motif shape and the black shape.Sew the tape (optional) for a more permanent finish.

6. Add trim to the front edges of the wallhanging. To hang the wallhanging, cut 2 6" pieces of the trim.Fold each piece in half, put one 1" in from each top corner; sew both raw edges to the top of the wallhanging.Pin and sew the front and back fabric, right sides together. Sew together, leaving an 8" opening to turn right side out.
Turn and slipstitch the opening closed.

HOME	Back To Catalog	Questions?
Kaye Wood Inc. Copyright 2005